Base Platform:

 

1)                  Single axel steel welded trailer

2)                  2” adjustable ball hitch

3)                  Single drop torsion suspension.

4)                  DOT approved lighting package to include electrical brake lights

5)                  Self lubricating wheel spindles

6)                  Telescopic manual outriggers with adjustable jacks sized to counter full mast extension.

7)                  Heavy duty safety chains

8)                  1 Spare tire and wheel, tire tool, operation manual

9)                  Two locking tool boxes

10)              Equipment installation platform (unistrut or other approved ) to allow attachment of up to a 3’ wide by 3’ tall by 16 “ deep electronics box.

11)              Maximum trailer size including tongue-12 ft long by 6 feet wide by 6 feet high.

12)              Maximum Payload 3500 pounds

13)              Tire Size – F7815

14) Also will primer and paint customers choice of color.

15) Includes License, Tag and Title Fees:

 

---

FM Series Mast:

 

1)                  32 foot maximum height of extension with capability to mount antennas at 20’, 25’ or top (ie. 28 -32’)

2)                  Hand winch operation with safety lock

3)                  Cable guide rings

4)                  T arm mount at top of tower capable of holding up to two 20 lb antennas each antenna with a sail area of 3 square feet (Total of 6 sq. feet)

5)                  Able to be deployed by one person with minimum amount of time and effort.

6)                  Mast to be telescoping type with one hinge for nesting parallel to trailer bed.

7)                  Maximum nested length of mast is 10 ft.

8)                  Mast to be mounted on trailer to provide stability when deployed as well as when broken down and towed on road ways.

9)                  Mast to have the ability to be easily rotated (for antenna alignment) even when fully deployed and has a locking mechanism once desired azimuth is obtained.

10)              Mast and all associated cables, accessories to be constructed of non corrosive heavy duty metal.

11)              No guide wires provided for stabilization of mast and will be capable of operating at 45 mph wind speed when fully deployed. A Survival wind speed of 100 mph is included.

12) Unit will include all proper safety & warning labels and base

section to be painted color specified color.

 

 

 

Power Supply:

 

1)      The primary power supply is battery operated.

2)      The 12 volt Battery system has the capability of delivering 1200 watts or 100 amps of total power over a 20 hour period (C20) without requiring a charge while maintaining 60% of its total rated capacity. A minimum 2500cycle life is provided - assuming the maximum discharge in a cycle is 60% of total rated capacity.

3)      The primary charging method will be via solar panel with a maximum of 110 watts charging power.

4)      A 13 hp gasoline powered backup generator is provided to charge batteries and provide auxiliary power for lighting or hand tools used for short durations. The generator has 7 gallon fuel tank.

5)      All critical cabling will be run in “Artic Flex” or equivalent cable with an operational temperature of -70° to +130°F.

6)      Battery charging is automatic with automatic switchover from solar to generator before batteries reach manufactures recommended drawdown level. Automatic high voltage cut off during charging included to ensure batteries are not overcharged above the manufacturers recommended level.

7)      A minimum of 4 convenience outlets are provided - AC power for hand tools etc. run off the generator. All outlets are GFI type rated for outdoor wet location use.

 

Honda Generator

• Generator

Specifications: Engine: Honda 8HP (242 cc) Single cylinder, Overhead Valve, air-cooled AC output: 120V/240V, 3500W (3.5 kVA) max. (29.2/14.6A), 3000W (3.0 kVA) rated (25.0/12.5A) Rated Frequency: 60 Hz (cycles) *Receptacles: C (20A 125V DUPLEX)   F  (30A 125V Locking Plug)  G  (20A 125V / 250V Locking Plug) DC output: 12V,100W (8.3A) For charging 12V batteries Starting system: Recoil, Electric (when equipped with optional battery and battery tray kit - see below for pricing) Fuel tank capacity: 4.5 gallons gasoline Operational capacity on one tankful: Approx. 8.3 hrs. @ rated load of 3000W Dimensions with wheel kit (LxWxH): 37.8"*x26.4"x30.5" Dimensions without wheel kit (LxWxH): 24"*x19.5"x19.5" Noise Level: 68 dB @ 7 Meters Dry weight: 160 lbs. Shipping Weight: 180 lbs. Oil Type: 10W-30 Fuel Type: 89 Octane unleaded gasoline Cooling System: Forced air Max. Engine Speed: 3,600 RPM

Generator comes with lockable metal cover.

 

 

 

 

 

 

 

SOLAR PANEL

 

 

 

CHARGE CONTROLLER

 

Morningstar’s superior series switching provides many advantages compared to shunt controllers. Series regulation reduces FET heating and lowers voltage stress on the power FET’s. A series configuration also improves protection against lightning surges and reduces switching noise. The series design improves charging accuracy. In PWM, series switching becomes self-correcting for temperature and system voltage drops.

 

 

 

 

BATTERY

 

 

12.03"L x 6.77"W x 8.93"H (to top of terminal) 12 volt 100 Amp-Hours @ 20 hour discharge rate. Weight 66 pounds. This is a Group 27 sized battery. Copper Alloy Terminals for improved electrical connections. No exposed lead terminals. This change was incorporated to improve environmental safety and health. Threaded insert terminals are recessed to prevent short circuits across battery connections. New cover is flat top design. No protruding or exposed vent valves.1 Reinforced container walls to reduce bulging. High Impact Strength Copolymer Polypropylene Case and Cover. Completely Sealed Valve Regulated Construction. Immobilized Electrolyte Non-Spillable. Maintenance Free Design Never Requires Watering. Absorbed Glass Mat (AGM) Micro-porous Glass Separators retain electrolyte. Flame Arresting Pressure Regulated Safety Valves. UL Recognized Systems Component. Positive Plates - Proprietary Lead Calcium Alloy- Negatives Plates - Lead Calcium. Low Self Discharge Rate Approximately 1 % per month at 25 C (77 F). Operate over a Wide Range of Temperatures from -40 C (-40 F) to +72 C (+160 F). Classified as "Non-Spillable Battery" for Transport. Compies with DOT HMR49, Non-Hazardous Materials.

 

Specifications for Concorde SunExtender Batteries Part Number Volts Capacity in Amp-Hours Weight Type 2 Hour 8 Hour 24 Hour 48 Hour 100 Hour PVX-1040T 12 82 90 105 120 130 68

 

AUTOSTART

 

The Battery Charge Manager is an environmentally sealed microprocessor driven solution to your battery management problems. Be assured our BCM will have the smarts to keep your battery in operational condition all the time. Constantly monitoring battery voltage, the BCM will activate the Autostart engine controller or the charging system to ensure full battery bank recharging, not just a partial "surface charge" or boiling the battery dry.

The Reliable solution

Never worry when your battery bank is called upon to meet your needs. The Battery Charge Manager will ensure you a fully charged battery, ready for your prime power or emergency needs. The Battery Charge Manager has many features not found in other products which perform this task.

Delay On Timer

Prevents unnecessary starting of the system when a large instant load or draw is placed upon the battery.

Run Timer

Depending on the charging rate of your alternator and the amp-hour capacity of your battery bank, running for a fixed time ensures that you can get a full recharge with out overcharging!

Adjustability

The high and low set points to begin and end the charging cycle are adjustable within a range of values. We can pre-set the BCM in our factory to your needs or you can set it up in the field. This provides the OEM a plug and run solution or gives the generator re-furbisher the ability to tailor the BCM for a specific job. These extra features make the BATTERY CHARGE MANAGER the premier product in it's class, combined with our industry leading 3 year warranty makes the BATTERY CHARGE MANAGER the obvious choice

Battery Charge Manager Specifications

Operating VDC Limits	4.75 VDC min/18VDC max.
Operating Temperature	-20 to 85º C
Physical Attributes	3.25" wide, 3.25" high, .5" deep Weight: 0.45 lbs. Aluminum case, epoxy sealed (black)
High/Low Pot Adjustments	10-15VDC
Standby Current Draw	12 Milli Amps
Operating Current Draw	160 Milli Amps
Run Output	5 Amps max continuos sourcing(+bat) output

 

Coleman PMP1200 Inverter

Coleman Powermate The Coleman name has long been the definition of dependability. The new Powermate lines of DC to AC inverters have hit the market by storm, outselling many of its competitors with its reputation for reliability. Depending on the size of the inverter that you choose, you'll have plenty of power to run appliances such as lights, color TVs, radios, fax machines, microwaves, refrigerators, computers, fan, blender, drill etc. They will work with your engine off or on. Their unique design includes multiple outlets, internal high-speed fans, input range of 10 to 15.0 volts DC and has high surge capacities for starting those difficult inductive loads. Includes a two-year warranty! Specifications: ·Coleman PMP1200 ·12 Volts DC to 120 Volts AC @ 60 Hz ·1200-Watts continuous 2400-Watts peak Includes: ·Over voltage shutdown ·Under voltage shutdown ·Low voltage alarm ·Overload shutdown ·Thermal shutdown ·Short circuit shutdown ·One 3-prong AC receptacle ·Warranty 2 years ·Weight 7.2 lbs ·Dimensions 10.75"x 8.5"x 3.3"

REEL

11 7/8" x 11 3/4" x 15" Holds 100ft. of  9/16" OD Cord