SONY 10 MEGA PIXEL CAMERA
| This Low-Cost 40 Foot Telescoping Mast comes with a remote controlled Sony 10 Mega Pixel camera. There is a Video Monitor attached to the console. This allows the operator to see what the camera has framed. The console handles the video 5 inch color monitor, pan and tilt control, power supply, and the shutter release for the camera. |
| This Low-Cost QTM 50 Foot Telescoping Mast comes with a remote controlled Sony 10 Mega Pixel camera. There is a Video Monitor attached to the console. This allows the operator to see what the camera has framed. The console handles the video 5 inch color monitor, pan and tilt control, power supply, and the shutter release for the camera. |
|
Low-Cost 40 Foot Telescoping Mast
|
 |
|
|
|
| LW40 TRIPOD |
|
TECHNICAL
FEATURES The Tripod extends to a full height within about 1 to 2 minutes. Average payload, up to 5-10 pounds. The tubes are automatically locked in place by a built in safety feature. The mast is made of high strength, fiberglass tubes. The tubes slide up and down. Mast has a long operating life with minimal maintenance. The base diameter of the legs is fixed. The large diameter tubes provide rigidity and strength when extended. These features eliminate any major whipping motion at the top. No claims made to maximum wind speed. Guy lines and anchor stakes are provided. |
The Telescoping Tripod System Specifications
|
MODEL |
EXTENDED LENGTH |
RETRACTED LENGTH |
WEIGHT |
| Tripod LW-40 | 40 FT. (12.19 M) | 5.66 FT. (1.73 M) | 18 LBS. (8.7 KG) |
| STANDARD CAMERA SYSTEM EQUIPMENT
COMPONENTS Telescoping Mast Adjustable Tripod Legs Guy Lines Anchor Stakes Sony R1 Digital, with Manual Zoom Lens Remote Camera Controls Bescor Positioner Control Console, with 5 inch Video Monitor, Pan Tilt Control, Shutter Release Battery Pack with 12 Volt Charger 50 Feet of Control Cable.
 QT TRIPOD
Then, as now, the distinguishing feature is the attached handpump. This method of extension makes the mast self contained, lightweight, easy to extend and very gentle in retraction. QTM series masts are used for lifting camera units, antennas, sound measurement, and air polution monitoring equipment. There is also a full range of Accessories available, including the free standing tripod shown above, as well as guy & guy pickets for use in strong winds, weather covers, vechicle mounting and shelter attachment brackets. Pneumatically extended, telescopic, aluminium alloy, makes the principle simple, as our competitors have found. Being complete with attached hand pump, they are a complete system in themselves. What turns simplicity into sophistication are the details, included on every mast. Clamping collars which make erection permanent at any height, up to the maximum of the mast, independent of air pressure. Guy collars are already fixed at the most appropriate height. A 24 mm clamp collar that really clamps the spigot of the headload and releases instantly when required, every time, year after year.
QT MAST
LW40 CAN BE USED WITH RECEIVER HITCH AND WHEEL KIT
360 Degrees Pan Tilt
Mast on QT Tripod Stand
QT Tripod Stand
 Email
|
