Large Winches

Made in the USA

HOME

Large Aluminum Electric & Hydraulic Winches
with Automatic Level Winder

Large Aluminum 12V - 24V - 120VAC Electric Winch

Large Short Frame Aluminum 12V Electric Winch

Large Aluminum Hydraulic Winch

Large Aluminum 12 or 24 VDC or 120VAC Winch
for long tethers, rope, line or cable.

Large Aluminum Winch with Electric Motor
The Large Aluminum Winch comes equipped with a 1 HP 12v or 24v or 120 VAC Motor, with a rating of 1800 RPM, 180 inch lbs. of torque geared through a 60 to 1 gear box. Torque is then applied to the spool shaft through a flexible coupling to minimize bearing failure. Amperage draw running light is approximately 9 amps DC. Under normal working conditions, the amperage draw is approximately 50 amps DC. As the case with any DC Motor, amperage increases and the RPM’s decrease with heavier loads. Maximum Line pull with empty spool is 900 pounds. Line Pull Speed is 57 Ft Per Minute. The Large Aluminum Winch comes with an Aluminum Level Wind, Stainless Steel Roller as standard equipment. Also, included is 1 #2X442 Drum switch that allows you to turn the reel in forward or reverse.

ITEM NUMBER
Large 1W 12V or 24V
Cost: $7,875

................................

ITEM NUMBER
Large 1W 120VAC
Cost: $7,625

Large MINI Aluminum 12 or 24 VDC or 120VAC Winch
for shorter tethers, rope, line or cable..

Large Aluminum Winch with Electric Motor
The Large Aluminum Winch comes equipped with a 1 HP 12v or 24v 0r 120VAC Motor, with a rating of 1800 RPM, 180 inch lbs. of torque geared through a 60 to 1 gear box. Torque is then applied to the spool shaft through a flexible coupling to minimize bearing failure. Amperage draw running light is approximately 9 amps DC. Under normal working conditions, the amperage draw is approximately 50 amps DC. As the case with any DC Motor, amperage increases and the RPM’s decrease with heavier loads. Maximum line pull with empty spool is 800 pounds. The Large Aluminum Winch comes with an Aluminum Level Wind, Stainless Steel Roller as standard equipment. Also, included is 1 #2X442 Drum switch that allows you to turn the reel in forward or reverse.

ITEM NUMBER
Large 2W 12V or 24V
Cost: $7,425

................................

ITEM NUMBER
Large 2W 120VAC
Cost: $7,025

Large Aluminum Winch with Hydraulic Motor
The Large Aluminum Winch is equipped with a powerful Parker Hydraulic Motor, 9 HP Honda GX270 engine, Aluminum level wind and stainless steel roller. Line pull with empty spool is 2,100 pounds. A compact, lightweight system providing Hydraulic power. Powered by legendary Honda 4-stroke gasoline engine. Unit is complete with engine, Hydraulic pump, Hydraulic tank and return line filter. Includes 8 gpm Hydraulic gear pump, 5 gallon Aluminum Hydraulic tank, mounted on Aluminum base plate with carrying handle. Hydraulic Fluid, Oil, Gasoline not included. Unit comes with various lengths of hose for custom installation and a SPW4 Valve to control how much oil you send to the Winch Motor. Approximately 19.5 W x 22 L x 24 H. Dry weight 83 pounds. 1 1/2" diameter tempered aluminum level wind shaft is standard - brass or stainless steel shaft-optional. With Stainless Steel Fairlead type follower unit weight is 124lbs. Spool Specifications - Spool Width 18 3/4" - will hold 800 feet of 1/2" line or rope Flanges: 12 3/4" Diametger Material: 319 Aluminum alloy core: 4" 6061 Aluminum pipe.

ITEM NUMBER
Large 2WH
Cost: $13,750

Now Available
with Honda GX390 Engine. a 13HP engine with a 11.3GPM Pump.

ITEM NUMBER

Large 2WH/113

Cost: $15,150

SPECIFICATIONS (for Large Electric Model) 1W

1/4" Tether Cable

Approx. 1.5 miles

5/16" Tether Line

Approx. 1 mile

Length x Width x Height

38" x 20" x 21 1/2"

Mounting Base

29 1/2" x 18"

Weight

138 lbs.

SPECIFICATIONS (for Mini Electric Model) 2W

1/4" Tether Cable

Approx. 2000 Feet

5/16" Tether Line

Approx. 1300 Feet

Length x Width x Height

38" x 14" x 15"

Mounting Base

29 1/2" x 13"

Weight

91 lbs.

SPECIFICATIONS (for Hydraulic Model) 2WH

1/4" Tether Cable

Approx. 2225 feet

1/2" Tether Line

Approx. 800 feet

Length x Width x Height

32" x 17" x 19"

Weight

155 lbs.

OPTIONS

REPLACEMENT DRUM SWITCH

ITEM : Large 1WS

$ 355.00

Variable Speed Level Winder

ITEM : VLW

$1,850.00

Dual Motor Drive with Brake

ITEM : DMD 12/24/120

$3,600.00

9 Inch Drum
ITEM : DS9
$1,050.00

Electrical Slip Ring 6 Signal Circuits - 9 Inch Drum Required
ITEM : ESR6
$2,600.00

Sand Shield on Level Winder

ITEM : SLW

$550.00

NOTE: Large 2WH Hydraulic Winch, does not include Hydraulic Fluid, Engine Oil, or Gasoline. Unit will need some assembly. Installation of hoses, placement of engine and control will be required.

Charlie Steffen

Systems Director

Phone 503 429 0648

Fax 888 697 1734

Mobile 503 396 8417

7 AM TO 5 PM - PST

charlie@telescopingmast.com

Copyright � 2009 Floatograph Technologies, LLC. All Rights Reserved. * Patented Components All materials contained in www.floatograph.com are protected by copyright and trademark and shall not be used for any purpose other than private, non-commercial viewing purposes. Derivative works and other unauthorized copying or use of stills, audio and video footage are expressly prohibited.